Ventaxia low carbon Kinetic BH (443028)

High efficiency, compact, SAP PCDB eligible, residential Mechanical Ventilation with Heat Recovery unit. With Summer Bypass and Integral Built-In Humidistat.

Recognised in SAP PCDB
Ultra quiet
Lightweight for easier installation
Horizontal duct option for space-saving installations
Fits within a 290mm deep kitchen cupboard
Integrated digital controller for simple and accurate commissioning
Plug and play controls; Humidistat, Ventwise, Wireless Remote
BMS connectivity
LS inputs (Light Switch)
SEC Class A
Horizontal duct options
Easy Installation
The Sentinel Kinetic models can be mounted vertically in a roof space, hallway cupboard or kitchen or within a kitchen cupboard. When mounted in an unheated area ducting and MVHR unit should be insulated. Ducting can be attached to the unit horizontally, vertically or both. Minimum internal depth of kitchen cupboard: V, B & BH models 290mm.

Left (L) or right (R) hand installation.
The unit is supplied with duct spigots to outside on the right hand side. These can be reversed on site by simply removing the control panel, rotating the unit 180 degrees and re-attaching the control panel.

Spigot Options
The combination of spigot options allows installation in confined locations. If vertical and horizontal connection is required on the same outlet/inlet, additional spigots can be supplied. The condensate drain can be taken out through the back, side or bottom of the unit. Using the fittings supplied, the final condensate connection is made outside the unit and can be completed after installation.

Integral Humidity Sensor (BH Models)
The integral humidity sensor increases speed in proportion to relative humidity levels, saving energy and reducing noise. The sensor also reacts to small but rapid increases in humidity, even if the normal trigger threshold is not reached. This unique feature ensures adequate ventilation, even for the smallest wet room. The night time relative humidity setback feature suppresses nuisance tripping as humidity gradually increases with falling temperature.

Maximum Airflow Rate (l/s) 65
Maximum Airflow Rate (m3/h) 234
Maximum Floor Area m2 150
Unit Connection 125

Technical Information
Stock Reference 443319
Product Type Ventilation
Product Range Heat Recovery
Impeller Forward Curved
Casing ABS
Speed Variable
Airstream Temperature -20°C to 45°C
dBA 39 dBA @ 3m
Warranty Up to 5 years
Electricial Information
Supply Voltage 220-240V/1/50Hz
Motor IP Rating IP22
S.T.O.P. Protection Yes
Speed Controllable In Built

If you are interested in this product in the UK please click here:

Customer Service

Contact Us

Co Galway
Tel.: +353 (0)91 633 800

© A+ Ventilation Supplies 2022